Add Kyria board configuration and examples
This commit is contained in:
tonasz
Kyle Brown
parent
2d4db12c46
commit
e7d306cf30
53
boards/kyria/README.md
Normal file
53
boards/kyria/README.md
Normal file
@ -0,0 +1,53 @@
|
||||
# Kyria Keyboard
|
||||
|
||||
A split keyboard with a 3x6 columnar stagger and 7 thumb keys. One button on each side is usually replaced by an
|
||||
encoder.
|
||||
|
||||
Official retailer of Kyria PCB: [splitkb.com](https://splitkb.com/collections/keyboard-kits/products/kyria-pcb-kit). PCB
|
||||
was designed with QMK in mind and KMK implementation is not officially supported by PCB designer and seller.
|
||||
|
||||
Keyboard works with controllers having Pro Micro layout. Existing configurations:
|
||||
|
||||
| PCB version | Board | Config file |
|
||||
|:-----------:|----------------------------------------------------------------------|---------------------------|
|
||||
| 1.* | [Sparkfun Pro Micro RP2040](https://www.sparkfun.com/products/18288) | kyria_v1_rp2040 |
|
||||
| 1.* | [Adafruit KB2040](https://www.adafruit.com/product/5302) | kyria_v1_kb2040 |
|
||||
| 2.* | [Sparkfun Pro Micro RP2040](https://www.sparkfun.com/products/18288) | _waiting for pinout docs_ |
|
||||
| 2.* | [Adafruit KB2040](https://www.adafruit.com/product/5302) | _waiting for pinout docs_ |
|
||||
|
||||
## Compatibility issues
|
||||
|
||||
- **TRRS connection** - KMK has no protocol for one-pin communication between two splits. So, if you are using TRRS wire
|
||||
connection, only right side send matrix events to the left side. No issue when using BLE.
|
||||
- **Right side encoder** - right encoder currently doesn't send updates to left half and can even freeze right half
|
||||
- **OLED screens** - OLED screens are not required, but often element of Kyria keyboards. KMK have no official OLED
|
||||
implementation, but as it's based on Circuit Python, adding one is very simple and there are many examples, also on
|
||||
KMK forks
|
||||
|
||||
## `main.py` example config
|
||||
|
||||
Current layout is based on default [QMK Kyria layout](https://config.qmk.fm/#/splitkb/kyria/rev1/LAYOUT)
|
||||
|
||||
It has the following modules/extensions enabled:
|
||||
|
||||
- [Split](https://github.com/KMKfw/kmk_firmware/tree/master/docs/split_keyboards.md) Connects halves using a wire
|
||||
- [Layers](https://github.com/KMKfw/kmk_firmware/tree/master/docs/layers.md) Do you need more keys than switches? Use
|
||||
layers.
|
||||
- [ModTap](https://github.com/KMKfw/kmk_firmware/blob/master/docs/modtap.md) Enable press/hold double binding of keys
|
||||
- [MediaKeys](https://github.com/KMKfw/kmk_firmware/blob/master/docs/media_keys.md) Common media controls
|
||||
|
||||
Also uncomment right section to enable samples of following:
|
||||
|
||||
- [RGB](https://github.com/KMKfw/kmk_firmware/tree/master/docs/rgb.md) Turn on the backlight (**requires neopixel.py
|
||||
library to work**)
|
||||
- [Encoder](https://github.com/KMKfw/kmk_firmware/blob/master/docs/encoder.md) Make the knobs do something
|
||||
|
||||
## More steps required during install
|
||||
|
||||
In order to mitigate lack of one-wire protocol, KMK use its UART implementation but with special low-level PIO
|
||||
subprogram available only on RP2040. It allows using other pins for UART than on-board RX and TX.
|
||||
|
||||
Because of the above, besides of normal installation steps, you have to also:
|
||||
|
||||
- install Circuit Python in 7.2+ version
|
||||
- add `adafruit_pioasm.mpy` library to lib or root folder of a board
|
||||
34
boards/kyria/kyria_v1_kb2040.py
Normal file
34
boards/kyria/kyria_v1_kb2040.py
Normal file
@ -0,0 +1,34 @@
|
||||
import board
|
||||
|
||||
from kmk.kmk_keyboard import KMKKeyboard as _KMKKeyboard
|
||||
from kmk.matrix import DiodeOrientation
|
||||
from kmk.matrix import intify_coordinate as ic
|
||||
|
||||
|
||||
class KMKKeyboard(_KMKKeyboard):
|
||||
col_pins = (
|
||||
board.A3,
|
||||
board.A2,
|
||||
board.A1,
|
||||
board.A0,
|
||||
board.SCK,
|
||||
board.MISO,
|
||||
board.MOSI,
|
||||
board.D10,
|
||||
)
|
||||
row_pins = (board.D8, board.D7, board.D6, board.D4)
|
||||
diode_orientation = DiodeOrientation.COL2ROW
|
||||
data_pin = board.D1
|
||||
rgb_pixel_pin = board.D0
|
||||
encoder_pin_0 = board.D9
|
||||
encoder_pin_1 = board.D5
|
||||
|
||||
coord_mapping = []
|
||||
coord_mapping.extend(ic(0, x, 8) for x in range(6))
|
||||
coord_mapping.extend(ic(4, x, 8) for x in range(5, -1, -1))
|
||||
coord_mapping.extend(ic(1, x, 8) for x in range(6))
|
||||
coord_mapping.extend(ic(5, x, 8) for x in range(5, -1, -1))
|
||||
coord_mapping.extend(ic(2, x, 8) for x in range(8))
|
||||
coord_mapping.extend(ic(6, x, 8) for x in range(7, -1, -1))
|
||||
coord_mapping.extend(ic(3, x, 8) for x in range(3, 8))
|
||||
coord_mapping.extend(ic(7, x, 8) for x in range(7, 2, -1))
|
||||
34
boards/kyria/kyria_v1_rp2040.py
Normal file
34
boards/kyria/kyria_v1_rp2040.py
Normal file
@ -0,0 +1,34 @@
|
||||
import board
|
||||
|
||||
from kmk.kmk_keyboard import KMKKeyboard as _KMKKeyboard
|
||||
from kmk.matrix import DiodeOrientation
|
||||
from kmk.matrix import intify_coordinate as ic
|
||||
|
||||
|
||||
class KMKKeyboard(_KMKKeyboard):
|
||||
col_pins = (
|
||||
board.D29,
|
||||
board.D28,
|
||||
board.D27,
|
||||
board.D26,
|
||||
board.D22,
|
||||
board.D20,
|
||||
board.D23,
|
||||
board.D21,
|
||||
)
|
||||
row_pins = (board.D8, board.D7, board.D6, board.D4)
|
||||
diode_orientation = DiodeOrientation.COL2ROW
|
||||
data_pin = board.RX
|
||||
rgb_pixel_pin = board.D0
|
||||
encoder_pin_0 = board.D9
|
||||
encoder_pin_1 = board.D5
|
||||
|
||||
coord_mapping = []
|
||||
coord_mapping.extend(ic(0, x, 8) for x in range(6))
|
||||
coord_mapping.extend(ic(4, x, 8) for x in range(5, -1, -1))
|
||||
coord_mapping.extend(ic(1, x, 8) for x in range(6))
|
||||
coord_mapping.extend(ic(5, x, 8) for x in range(5, -1, -1))
|
||||
coord_mapping.extend(ic(2, x, 8) for x in range(8))
|
||||
coord_mapping.extend(ic(6, x, 8) for x in range(7, -1, -1))
|
||||
coord_mapping.extend(ic(3, x, 8) for x in range(3, 8))
|
||||
coord_mapping.extend(ic(7, x, 8) for x in range(7, 2, -1))
|
||||
99
boards/kyria/main.py
Normal file
99
boards/kyria/main.py
Normal file
@ -0,0 +1,99 @@
|
||||
from kyria_v1_rp2040 import KMKKeyboard
|
||||
|
||||
from kmk.extensions.media_keys import MediaKeys
|
||||
from kmk.extensions.rgb import RGB, AnimationModes
|
||||
from kmk.keys import KC
|
||||
from kmk.modules.encoder import EncoderHandler
|
||||
from kmk.modules.layers import Layers
|
||||
from kmk.modules.modtap import ModTap
|
||||
from kmk.modules.split import Split, SplitType
|
||||
|
||||
keyboard = KMKKeyboard()
|
||||
keyboard.debug_enabled = True
|
||||
|
||||
keyboard.modules.append(Layers())
|
||||
keyboard.modules.append(ModTap())
|
||||
keyboard.extensions.append(MediaKeys())
|
||||
|
||||
# Using drive names (KYRIAL, KYRIAR) to recognize sides; use split_side arg if you're not doing it
|
||||
split = Split(split_type=SplitType.UART, use_pio=True)
|
||||
keyboard.modules.append(split)
|
||||
|
||||
# Uncomment below if you're using encoder
|
||||
encoder_handler = EncoderHandler()
|
||||
encoder_handler.pins = ((keyboard.encoder_pin_0, keyboard.encoder_pin_1, None, False),)
|
||||
|
||||
# Uncomment below if you're having RGB
|
||||
rgb_ext = RGB(
|
||||
pixel_pin=keyboard.rgb_pixel_pin,
|
||||
num_pixels=10,
|
||||
animation_mode=AnimationModes.BREATHING_RAINBOW,
|
||||
)
|
||||
keyboard.extensions.append(rgb_ext)
|
||||
|
||||
# Edit your layout below
|
||||
# Currently, that's a default QMK Kyria Layout - https://config.qmk.fm/#/splitkb/kyria/rev1/LAYOUT
|
||||
ESC_LCTL = KC.MT(KC.ESC, KC.LCTL)
|
||||
QUOTE_RCTL = KC.MT(KC.QUOTE, KC.RCTL)
|
||||
ENT_LALT = KC.MT(KC.ENT, KC.LALT)
|
||||
MINUS_RCTL = KC.MT(KC.MINUS, KC.RCTL)
|
||||
keyboard.keymap = [
|
||||
[
|
||||
KC.TAB, KC.Q, KC.W, KC.E, KC.R, KC.T, KC.Y, KC.U, KC.I, KC.O, KC.P, KC.BSPC,
|
||||
ESC_LCTL, KC.A, KC.S, KC.D, KC.F, KC.G, KC.H, KC.J, KC.K, KC.L, KC.SCLN, QUOTE_RCTL,
|
||||
KC.LSFT, KC.Z, KC.X, KC.C, KC.V, KC.B, KC.LBRC, KC.CAPS, KC.MO(5), KC.RBRC, KC.N, KC.M, KC.COMM, KC.DOT, KC.SLSH, KC.RSFT,
|
||||
KC.MO(6), KC.LGUI, ENT_LALT, KC.SPC, KC.MO(3), KC.MO(4), KC.SPC, KC.RALT, KC.RGUI, KC.APP,
|
||||
],
|
||||
[
|
||||
KC.TAB, KC.QUOT, KC.COMM, KC.DOT, KC.P, KC.Y, KC.F, KC.G, KC.C, KC.R, KC.L, KC.BSPC,
|
||||
ESC_LCTL, KC.A, KC.O, KC.E, KC.U, KC.I, KC.D, KC.H, KC.T, KC.N, KC.S, MINUS_RCTL,
|
||||
KC.LSFT, KC.SCLN, KC.Q, KC.J, KC.K, KC.X, KC.LBRC, KC.CAPS, KC.MO(5), KC.RBRC, KC.B, KC.M, KC.W, KC.V, KC.Z, KC.RSFT,
|
||||
KC.MO(6), KC.LGUI, ENT_LALT, KC.SPC, KC.MO(3), KC.MO(4), KC.SPC, KC.RALT, KC.RGUI, KC.APP,
|
||||
],
|
||||
[
|
||||
KC.TAB, KC.Q, KC.W, KC.F, KC.P, KC.B, KC.J, KC.L, KC.U, KC.Y, KC.SCLN, KC.BSPC,
|
||||
ESC_LCTL, KC.A, KC.R, KC.S, KC.T, KC.G, KC.M, KC.N, KC.E, KC.I, KC.O, QUOTE_RCTL,
|
||||
KC.LSFT, KC.Z, KC.X, KC.C, KC.D, KC.V, KC.LBRC, KC.CAPS, KC.MO(5), KC.RBRC, KC.K, KC.H, KC.COMM, KC.DOT, KC.SLSH, KC.RSFT,
|
||||
KC.MO(6), KC.LGUI, ENT_LALT, KC.SPC, KC.MO(3), KC.MO(4), KC.SPC, KC.RALT, KC.RGUI, KC.APP,
|
||||
],
|
||||
[
|
||||
KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.PGUP, KC.HOME, KC.UP, KC.END, KC.VOLU, KC.DEL,
|
||||
KC.TRNS, KC.LGUI, KC.LALT, KC.LCTL, KC.LSFT, KC.TRNS, KC.PGDN, KC.LEFT, KC.DOWN, KC.RGHT, KC.VOLD, KC.INS,
|
||||
KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.SLCK, KC.TRNS, KC.TRNS, KC.PAUS, KC.MPRV, KC.MPLY, KC.MNXT, KC.MUTE, KC.PSCR,
|
||||
KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS,
|
||||
],
|
||||
[
|
||||
KC.GRV, KC.N1, KC.N2, KC.N3, KC.N4, KC.N5, KC.N6, KC.N7, KC.N8, KC.N9, KC.N0, KC.EQL,
|
||||
KC.TILD, KC.EXLM, KC.AT, KC.HASH, KC.DLR, KC.PERC, KC.CIRC, KC.AMPR, KC.ASTR, KC.LPRN, KC.RPRN, KC.PLUS,
|
||||
KC.PIPE, KC.BSLS, KC.COLN, KC.SCLN, KC.MINS, KC.LBRC, KC.LCBR, KC.TRNS, KC.TRNS, KC.RCBR, KC.RBRC, KC.UNDS, KC.COMM, KC.DOT, KC.SLSH, KC.QUES,
|
||||
KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS,
|
||||
],
|
||||
[
|
||||
KC.TRNS, KC.F9, KC.F10, KC.F11, KC.F12, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS,
|
||||
KC.TRNS, KC.F5, KC.F6, KC.F7, KC.F8, KC.TRNS, KC.TRNS, KC.RSFT, KC.RCTL, KC.LALT, KC.RGUI, KC.TRNS,
|
||||
KC.TRNS, KC.F1, KC.F2, KC.F3, KC.F4, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS,
|
||||
KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS,
|
||||
],
|
||||
[
|
||||
KC.TRNS, KC.TRNS, KC.TRNS, KC.DF(0), KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS,
|
||||
KC.TRNS, KC.TRNS, KC.TRNS, KC.DF(1), KC.TRNS, KC.TRNS, KC.RGB_TOG, KC.RGB_SAI, KC.RGB_HUI, KC.RGB_VAI, KC.RGB_M_P, KC.TRNS,
|
||||
KC.TRNS, KC.TRNS, KC.TRNS, KC.DF(2), KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.RGB_SAD, KC.RGB_HUD, KC.RGB_VAD, KC.RGB_M_P, KC.TRNS,
|
||||
KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS, KC.TRNS,
|
||||
],
|
||||
]
|
||||
|
||||
# Uncomment below if using an encoder
|
||||
# Edit your encoder layout below
|
||||
encoder_handler.map = (
|
||||
((KC.VOLD, KC.VOLU),),
|
||||
((KC.VOLD, KC.VOLU),),
|
||||
((KC.VOLD, KC.VOLU),),
|
||||
((KC.MPRV, KC.MNXT),),
|
||||
((KC.MPRV, KC.MNXT),),
|
||||
((KC.MPRV, KC.MNXT),),
|
||||
((KC.MPRV, KC.MNXT),),
|
||||
)
|
||||
keyboard.modules.append(encoder_handler)
|
||||
|
||||
if __name__ == '__main__':
|
||||
keyboard.go()
|
||||
Loading…
Reference in New Issue
Block a user