remove adafruit_pioasm dependency

docs/split_keyboards.md

@@ -108,10 +108,7 @@ If you're using an RP2040 based board and want the split communication to use ot
 In order to enable it, you must:
 
 - Install Circuitpython version > 7.2,
-- add the `adafruit_pioasm.mpy` library to the lib or root folder of the boards,
-- and pass `use_pio=True` into the `Split()` constructor.
-
-The file is available [on the library release page](https://github.com/adafruit/Adafruit_CircuitPython_PIOASM/releases). From the `adafruit-circuitpython-pioasm-x.y-mpy-0.x.y.zip`, copy the `lib` folder (or its content) to the root of your circuitpython drives. Make sure to get the zip corresponding to your circuitpython version as the mpy format can evolve!
+- pass `use_pio=True` into the `Split()` constructor.
 
 
 ### `data_pin`/`data_pin2`

kmk/transports/pio_uart.py

@@ -2,10 +2,9 @@
 Circuit Python wrapper around PIO implementation of UART
 Original source of these examples: https://github.com/adafruit/Adafruit_CircuitPython_PIOASM/tree/main/examples (MIT)
 '''
-import adafruit_pioasm
 import rp2pio
+from array import array
 
-tx_code = adafruit_pioasm.assemble(
 '''
 .program uart_tx
 .side_set 1 opt
@@ -16,10 +15,12 @@ tx_code = adafruit_pioasm.assemble(
 bitloop: ; This loop will run 8 times (8n1 UART)
   out pins, 1 ; Shift 1 bit from OSR to the first OUT pin
   jmp x-- bitloop [6] ; Each loop iteration is 8 cycles.
-'''
-)
 
-rx_code = adafruit_pioasm.assemble(
+; compiles to:
+'''
+tx_code = array('H', [40864, 63271, 24577, 1602])
+
+
 '''
 .program uart_rx_mini
 
@@ -34,8 +35,9 @@ bitloop:                ; Loop 8 times
     in pins, 1          ; Sample data
     jmp x-- bitloop [6] ; Each iteration is 8 cycles
 
+; compiles to:
 '''
-)
+rx_code = array('H', [8224, 59943, 16385, 1602])
 
 
 class PIO_UART: